Deep-cleaning nasal strips with activated carbon have been specially developed to deeply clean the pores and remove unwanted blackheads.

The strips remove the dirt and oil that clog the pores, leaving your skin clear and smooth.

Main advantages:
* Immediately cleans clogged pores
* Removes blackheads
* Larger size for a better fit

Application: Wash your face thoroughly and make sure that it is free of creams, lotions or make-up. Dry your hands, open the package and pull the strip off the plastic wrap. Use opened packets immediately so that the film can be removed easily. Moisten your nose thoroughly with water. If the nose is not wet enough, the strip may not stick and may not be effective. Apply the strip to the moistened nose area with the shiny side facing your skin. Push the air bubbles down and smooth them out. Make sure you have good skin contact. Let the strip dry for 10 to 15 minutes. The strip should feel stiff when drying. Depending on the air humidity, climate or sweat, let it act a little longer or shorter. After the strip has dried, slowly and carefully pull the strip off the edges and pull towards the center. Rinse off with water.